• One stage horizontal centrifugal pumps.
• Pump range covering wide hydraulic performances.
• High efficiency, low NPSH required and silent running.
• Maximum parts interchangability.
• Back pull out design.
• Easy pump dismantling.

• Water treatment.
• Marine industry.
• Irrigation.
• Heating, ventilation, air-conditioning.
• Refrigeration.
• Water supply & distribution (industries or municipalities).
• Food & beverage industry.
• Other applications handling hot, cooling, drinking process of water or sea water.

SP-Series SELF-PRIMED HORIZONTAL PUMPS: side channel pumps, also called liquid ring pumps, are designed to separate air and liquid from emulsion. These self-primed pumps have a high priming capacity; multi-stage design enables one or several stages assembly. The discharge pressure is directly related to the number of stages. Therefore, SP-Series pumps achieve high discharge pressures at low rotating speeds with fewer stages compared to multistage centrifugal pumps, thus being more economical in operation.

• Gas-oil, petrol, nafta, kerosene, fuel pumping;
• Boiler feeding;
• Condensed water extraction;
• Chemical products, emulsified and other type liquids with difficult suction conditions;
• Sanitary hot water circulation

Designed for applications with limited space and can be assembled IN-LINE on straight pipelines. The pump inner parts, such as impeller, mechanical seal, ball bearings, wear rings, etc. are easily accessible without any need for suction and discharge pipe removal. Moreover, on the CM-Series it is not necessary to disassemble the motor or electrical connections.

• GENERAL: power plants; air-conditioning, refrigeration and heating; cooling systems; water supply and irrigation systems; clear or lightly charged liquid pumping.
• MARINE : general services, bilge, ballast, deck wash, firefighting, fresh and sea water cooling of main engine, gear box and auxiliary equipment, brine circulation and transfer, water circulation for condenser and evaporators, air conditioning , harbor and shipyard services.

In- line vertical suction, double volute centrifugal pump.
Robust design with two grease lubricated ball bearings.
Flexible coupling.

Capacity  < 4000 m3 / hr
Head   < 60 m
DN   300 - 400
Temp.  < 120oC

The BT series spindle pumps are coupled to flexible coupling and driven normally by electric motors.
They can also be driven by petrol, diesel, pneumatic or hydraulic motors This pumping design and construction enables a noiseless fluid handling without pressure pulsations and turbulence. Therefore, they can rotate at high rotation speeds with high reliability. These self priming positive displacement pumps have three spindles, one driving and two driven.

They are mainly applied for lub-oil pumping and fuel pumping, transferring and feeding.
Viscosity’s from 2 to 1,500 cst (mm2/s)

**Available in Vertical and Horizontal orientation.

• Self-primed (they do not require any suction foot valve).
• Back pullout design (disassembly without pipe removal).
• Heavy radial ball bearing (grease lubricated).
• Double rotation sense option, assembling interchangeable diffuser and impeller.

• INDUSTRIAL: transfer, circulation, and low pressure feeding of various kinds of liquids.
• GENERAL: draining of garages, canals, swimming pools and ponds.
• MARINE: ballast, bilge, fire fighting, engine cooling, general services.

• PK Series – peripheral electro-pumps.
• JSW Series – self-primed centrifugal pumps.
• CP Series – centrifugal pumps.
• JDW Series – deep-well centrifugal pumps.
• 2CP Series – Twin impeller centrifugal pumps.

• GENERAL INDUSTRIES: cooling system circuits, water supplies, pressure sets, etc.
• OTHER: water pressure sets, car washing, spring feeding, swimming pool and pits drainage, etc.
• Featuring a wide range of capacities and pressures, silent running, minimum electric power consumption and compact assembly.

Simple assembly without alignment

Marine, cooling, irrigation, heating, air-conditioning.